Cam Follower, Thrust Roller Bearing, Mini Thrust Ball Bearing, Linear Ball Bushing, Rails, Cross Roller Guides Way, Ball Screws, Linear Guide Ways, Rolled Ball Screws, Cylindrical Roller Bearings, Mumbai, India

SF - PK PEEK

Introduction:

SF-PK is made of steel plate-bronze-PEEK. Sintered with porous bronze 0.25-0.3mm on steel backing, roll modified PEEK in the gap of bronze, form a antifrication layer, the depth of it is 0.15-0.2mm.

Technical :

Load                                                                                capacity:                                            140N/mm²
Temperature:-100~+250                                                                                                                             ^oC
Speed                                                                                limit:                                                  3.0m/s
Friction                                                                              coef(u):                                              0.09~0.24
PV                                       LIMIT(Dry):                              3.10N/mm²                                         .m/s
PV LIMIT(Oil): 31.70N/mm² .m/s

Application:

1. It is of low friction coefficient, good anti-wear, because of the antifriction layer is made of PEEK.

2. Prolong working life due to the steelness and toughness of the antifriction layer.

3. Deforming temperature can reach 300 degree centigrades.and also can reach 250 degree centigrades when in longterm used, because of the good heat resistance of the antifriction layer.

4. Good stability of the size. Not suck up moistrue and oil.. When in water and steam, have no chemical change.

5. Can be used in acid circumstance (except concentrated sulphuric acid.)

6. It is widely used in metallurgy industry, mine, irrigation works, bridge, shock absorber of automobile, etc.